Select [SRAM] or [CF Card] for the storage location of sampling data.
With [SRAM] selected, backup power is supplied from the battery attached to the MONITOUCH when the power is OFF.

V8 series

1. Select [System Setting] → [Buffering Area Setting], and select [Type: SRAM] for the primary storage target or [Output Media: CF Card] for the secondary storage target.

    

   When [Type: SRAM] is set, install the supplied battery to the MONITOUCH.

    

   

    

2. Transfer the screen data.

    

3. "Error : 163 (24 : 0)" or "161 (24 : 0)" is displayed.
   When [Type: SRAM] is set for the primary storage target, the SRAM must be formatted on the V series.
   Bring up the Main Menu screen on the V8 series, and press [Main Menu] → [SRAM/Clock] → [Format] → [Execute].
   For more information, click here.

V7 series
Select [System Setting] → [Buffering Area Setting], and select [SRAM] or [CF Card] for [Store Target].
When [Store Target: SRAM] is set, the SRAM must be formatted. Follow steps (1) to (4).

1. Click [SRAM Setting] and specify a value greater than [Word Count] for [Set Word] of [Memory Card Emulation Area].
   

    

2. Select [Parts] → [Parts List] → [Memory Card] → [2D] or [3D] [#x FormatSwitch], place it on the screen, and then transfer screen data.

    

3. "Data has some error 163 or 161" is displayed. Bring up the Main Menu screen on the V7 series, and press [SRAM/Clock] → [Format] → [Execute].

    

4. Press the card format switch placed in step 2.